Title: animated grass
R[_]$Ty - December 2, 2004 10:53 PM (GMT)
1.} Start a new document 500x100 px rgb and transparent (image size)
2.} Now time for your brush you are gonna be using select brush tool then go to where your gonna select what type and if you already have been using brushes go to where u pick your custom brushes and select reset brushes it doesn’t delete any brushes. It just sets you to default brushes.
Then select the brush I highlighted in red and se the px size to 62
then select your foreground color to be 0D8524 and your back round color to 17500A it should look like this now
(brush and color)
3.}its time to put the grass on the image then try to drag it across the bottom and not go to high up or to far down
and the first time it goes by there isn’t much grass and if you are not happy with it you can add another coat of grass. I added 2 coats of grass.
And now create a new layer ctrl+shift+n) and you can make up to 4-20 layers if you want. And then so you can see the grass on each layer click this. the eyeball makes the layer go invisible so you can see all the other layers behind or in front of it.
(grass)
4.} Now that you have added grass to all the layers now its time to use your render I choose this 1
Now make sure you put your render behind all the grass layers by dragging it by them and putting behind layer 1 . now its time to add your sky or back round I choose a dark sky with moon like so
and also make sure you put that behind your render if you don’t you wont see your render now you can add your font and text and a boarder (render bg and text , boarder)
5.}Then transfer to image ready
then make sure all of the eyeballs don’t have a eyeball showing except ur render boarder 1 layer of grass your backround and text.
Then hit duplicate layer like so
and then click the eyeball so it appears and then make sure to click the first layer eyeball so it goes invisible and click the second layer of grass
then hit the tween
and make sure all the boxes are checked except for selected layers and set the frame rate between 5-20 5 being fast 20 being slow.
(you don’t have to duplicate again)And then repeat to all of your grass layers then when you come to your final 1 set the final frame to your first layer and tween it 5 frames. (animation)
then you get your final project :P
2.} Now time for your brush you are gonna be using select brush tool then go to where your gonna select what type and if you already have been using brushes go to where u pick your custom brushes and select reset brushes it doesn’t delete any brushes. It just sets you to default brushes.
Then select the brush I highlighted in red and se the px size to 62
then select your foreground color to be 0D8524 and your back round color to 17500A it should look like this now
(brush and color)
3.}its time to put the grass on the image then try to drag it across the bottom and not go to high up or to far down
and the first time it goes by there isn’t much grass and if you are not happy with it you can add another coat of grass. I added 2 coats of grass.
And now create a new layer ctrl+shift+n) and you can make up to 4-20 layers if you want. And then so you can see the grass on each layer click this. the eyeball makes the layer go invisible so you can see all the other layers behind or in front of it.
(grass)
4.} Now that you have added grass to all the layers now its time to use your render I choose this 1
Now make sure you put your render behind all the grass layers by dragging it by them and putting behind layer 1 . now its time to add your sky or back round I choose a dark sky with moon like so
and also make sure you put that behind your render if you don’t you wont see your render now you can add your font and text and a boarder (render bg and text , boarder)
5.}Then transfer to image ready
then make sure all of the eyeballs don’t have a eyeball showing except ur render boarder 1 layer of grass your backround and text.
Then hit duplicate layer like so
and then click the eyeball so it appears and then make sure to click the first layer eyeball so it goes invisible and click the second layer of grass
then hit the tween
and make sure all the boxes are checked except for selected layers and set the frame rate between 5-20 5 being fast 20 being slow.
(you don’t have to duplicate again)And then repeat to all of your grass layers then when you come to your final 1 set the final frame to your first layer and tween it 5 frames. (animation)
then you get your final project :P